Plumbing Fittings - Page 2 - Super Savings! Save up to 34%


Super Savings! Up to 34% off on Plumbing Fittings at Breezin Thru Charters, Page 2. Top brands include SeaLux Marine Products, Perko, Spears Manufacturing, Manufacturers Direct, Boating Accessories, Spears, T. H. Marine, Brass Blessing, Scandvik, T-H Marine Supply, MOELLER MFG. COMPANY, INC., THMA - T. H. MARINE, Sea-Dog, & SEACHOICE. Hurry! Limited time offers. Offers valid only while supplies last.



SeaLux Marine STRAIGHT 316 SS Trim Cover Black Poly Thru-Hull/Scupper Drain with RUBBER FLAPPER for Hose dia. 1-1/2", Flange dia. 2-3/8" for Bilge Pump
By SeaLux Marine Products
In Stock
$22.75
$21.75
You Save: 4%

mpn: unknown, ean: 0813969023986,

4.5 out of 5 stars with 53 reviews
S8535R SeaLux Marine STRAIGHT Thru Hull/ Scupper With 316 Stainless Steel Trim Cover with FLAPPER, Molded from polypropylene with fiber glass for strength. Thru-Transom scupper with RUBBER FLAPPER opens easily. The flap allows the water to drain. The black rubber flap automatically closes to prevent incoming backwash. Not recommended for use below the waterline. For Hose: 1-1/2'', Flange: 2-3/8''; Max Hull Thickness: 1-1/2''; Cut Hole for installation: 1-5/8'', Adding sealant to the flange


Perko 3/8" Thru-Hull Fitting w/Pipe Thread Bronze MADE IN THE USA
By Perko
In Stock
$23.84

mpn: 0322DP3PLB, ean: 0042112028060,

4.5 out of 5 stars with 111 reviews
Perko 3/8'' Thru-Hull Fitting w/ Pipe Thread BronzeFlange is machined to fit hull and grooved to retain bedding pound. Neckis threaded to approximately 3/8 inch from flange.Cast bronze.Technical Information:Pipe Size Inches: 3/8Mouting Hole Diameter Inches: 11/16Maximum Hull Thickness Inches: 1-3/4O.D. Flange Inches: 1-7/16Model Number: 0322DP3PLBShip Weight: 1.7/6.9 lbs.MADE IN THE USA Product : PERKO 3/8'' THRU-HULL FITTING W/ PIPE THREAD BRONZE Manufacturer : PERKO Manufacturer Part No :


Spears 88-C Series CPVC Pipe Fitting, Nipple, Schedule 80, Gray, 3" NPT Male, 3" Length
By Spears Manufacturing
In Stock
$14.79

mpn: 889-030C, ean: 0054211124857,

4.2 out of 5 stars with 59 reviews
This Spears schedule 80 CPVC nipple fitting has male NPT threads on both ends and is suitable for connecting pipes with the same diameter. The National Pipe Taper (NPT) threads create a tighter seal than straight threads. The fitting is made of medium gray CPVC (chlorinated polyvinyl chloride) for chemical and corrosion resistance, high strength, and better resistance to high temperatures and pressures than PVC (polyvinyl chloride), making it suitable for both hot and cold water pressure


Fitting Pex 3/4 Brs Elbow 5pk
By Manufacturers Direct
In Stock
$12.44

mpn: APXE34345PK, ean: 0670750702792,

4.2 out of 5 stars with 113 reviews
Fitting Pex 3/4 Brs Elbow 5pkFitting Pex 3/4 Brs Elbow 5pk. BAG5.


Boating Accessories New Blower Vent Hose trident Hose 4023006 3" ID Length 50' Black
By Boating Accessories
SKU: #606-4023006
In Stock
$27.49
$23.79
You Save: 13%

sku: 606-4023006, mpn: TRC 4023006, ean: 0704917009292,

4.0 out of 5 stars with 81 reviews
New Blower Vent Hose trident Hose 4023006 3'' ID Length 50' Black : For venting bilge gases and fumes. Resistant to ozone sunlight and weather checking. Wire vinyl coated carcass is corrosion resistant. Vinyl construction will not support flame.TRIDENT RUBBER INC. 4023006, TRC4023006.


Spears 420 Series PVC Pipe Fitting, Cross, Schedule 40, 3" Socket
By Spears
In Stock
$13.70
$11.10
You Save: 19%

mpn: 420-030, ean: 0054211139486,

4.1 out of 5 stars with 12 reviews
This Spears 420 series schedule 40 PVC cross fitting has socket openings on each end and has four openings positioned at 90-degrees from each other for connecting and branching four pipes. The socket ends connect to pipes with a smooth bore for enhanced flow. This cross fitting is made of white PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for


MINIATURE AERATOR SCREEN-Fits 1-1/8" Fittings
By T. H. Marine
In Stock
$11.10

mpn: ASM-5-DP,

4.9 out of 5 stars with 119 reviews
Aerator screen.Fits 1-1/8'' fittings. Replacement part.


SeaLux Marine 15 degree 316 SS Trim Cover Grey Poly Thru-Hull/STALON Scupper Drain with RUBBER FLAPPER for Hose dia. 1-1/2", Flange dia. 3-1/4" for Bayliner Boat (Southco, part number M7-10-9005261)
By SeaLux Marine Products
In Stock
$35.75
$33.75
You Save: 6%

mpn: unknown, ean: 0813969024693,

4.5 out of 5 stars with 51 reviews
This 15 degreeThru hull stalon with scupper manufactured by Southco, part number M7-10-9005261. Commonly used by Bayliner Boats, and SeaRay Boats. Light-weight design with a stainless steel appearance tested to ASTM D638 and ASTM D790 Features a one-way PVC check value Constructed from Nylon 66 with 30% fiber glass fill Scupper body, in Grey Color Mirror Polish 316 stainless steel Flange Rubber Flapper to prevent water backup Has an approximate 3 1/4'' OD flange, an approximate 4'' max hull


Brass Blessing Marine Port Hole/Window/Porthole - 4 INCHES Nautical/Boat/Maritime (5216)
By Brass Blessing
In Stock
$30.00

mpn: 5216,

4.7 out of 5 stars with 103 reviews
ALUMINIUM MADE SILVER TYPE - Recently Made Best Quality Replica MARINE PORT HOLE PORT WINDOW - ALUMINUM BODY - GLASS(ACRYLIC) SIZE: APPROX 4 INCHES - OUTER SIDE SIZE: APPROX 7 INCHES - LITTLE AND VERY NICE - WEIGHT APPROX: 0.360 GRAMS - THIS PORT HOLE COMES WITH ACRYLIC, NOT WITH GLASS - ALUMINUM MADE SILVER TYPE - BEST QUALITY REPLICA - THIS PORT HOLE COMES WITH ACRYLIC, NOT WITH GLASS - BULK BUYERS ARE ALWAYS WELCOME - THIS PORT WINDOW IS FOR DECORATION ONLY. BEST QUALITY REPLICA - Check All


Stephen Pipe & Steel Hd10050rp Tension Bar, 72"
By Manufacturers Direct
In Stock
$17.16

mpn: HD10050RP, ean: 0754761760368,

4.3 out of 5 stars with 78 reviews
Tension bar for chainlink fence. CHAIN LINK FENCE TENSION BAR Lgth In=72Tension bar for chainlink fence.. CHAIN LINK FENCE TENSION BAR. Lgth In=72 , EA.


Manufacturers Direct ANAHEIM MFG, Dishwasher Connector Kit, EA
By Manufacturers Direct
In Stock
$10.99

mpn: 1023, ean: 0029122010230,

4.3 out of 5 stars with 46 reviews
For use with any disposer. Carded. DISHWASHER CONNECTORS PLUMB-GOODIESFor use with any disposer. Carded.. DISHWASHER CONNECTORS. PLUMB-GOODIES , EA.


Spears 188N Series PVC Pipe Fitting, Nipple, Thread on One End, Schedule 80, Gray, 3" NPT Male x Socket, 6" Length
By Spears Manufacturing
In Stock
$25.14

mpn: 1889-060, ean: 0054211116791,

4.9 out of 5 stars with 115 reviews
This Spears schedule 80 PVC nipple fitting has a socket opening on one end and female NPT threads on the other, and is suitable for connecting threaded and unthreaded pipes or fittings. The socket end connects to pipes with a smooth bore for enhanced flow, and the National Pipe Taper (NPT) threads create a tighter seal than straight threads. The fitting is made of gray PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.


Scandvik 12131P Passivated Transom Shower Handle Stainless Steel White 6' Nylon Hose
By Scandvik
In Stock
$88.36

mpn: 12131P, ean: 0786142121314,

4.1 out of 5 stars with 91 reviews
The Scandvik 12131P recessed shower head features stainless steel construction, white accents, and a a 6' white nylon hose. The sprayer is push button activated, has an attached lanyard for easy pull out, and includes mounting hardware.Can mount vertically or horizontally. Cap features a shower logo for easy identification. Ideal as a transom or deck shower.


T-H Marine Supply Y-Fitting for 3/4" I.D. Hose
By T-H Marine Supply
SKU: #232-Y750DP
In Stock
$9.06

sku: 232-Y750DP, mpn: Y750DP, ean: 0733572044102,

4.3 out of 5 stars with 58 reviews
Y-fitting is three way, for 3/4'' hose.T-H Marine Supply. Y-750-DP.


Flanging Tool, 1-1/4 inch Drain Tube
By MOELLER MFG. COMPANY, INC.
SKU: #107435
In Stock
$37.54
$29.53
You Save: 21%

sku: 107435, mpn: 2070400, ean: 0039729207049,

4.0 out of 5 stars with 57 reviews
Flanges aluminum or brass tubes in one easy operation. Nut and bolt of hardened steel, steel fixture and thrust ball bearings.MOELLER MFG. COMPANY, INC. 02070400, MOE02070400.


TH Marine 90 Degree Thru Hull, 1-1/8 in. Barb - TH1290T
By THMA - T. H. MARINE
In Stock
$12.11
$11.99

mpn: TH-1290-DP, ean: 0733572030600,

4.6 out of 5 stars with 98 reviews
High-quality UV & chemical-resisant virgin polypro. Sized to fit all marine hose. TH-7590: Black. TH-7592: White. TH-1290: Black. TH-1292: White. TH-1592: White.TH-1290-DP.


Perko 0301DP4 Thru-Hull Connection for Hose, White, 1/2-Inch
By Perko
In Stock
$12.80
$11.95
You Save: 7%

mpn: 4333795563, ean: 0085226028250,

4.8 out of 5 stars with 97 reviews
Molded white polymer thru hull fitting for use with hose. Narrow flange. Not recommended for use below the waterline. Hose size: 1/2''/Mounting Hole Diameter: 13/16''/Max Hull Thickness: 1-1/4''/Flange OD: 1-1/4''.Molded white polymer thru-hull connection. For use with hose. Not for use below the waterline. 1/2'' hose size. 5-year warranty.


Spears 854-040 Glass-Filled PVC Pipe Fitting, Van Stone Flange, Class 150, Schedule 80, 4" Socket
By Spears Manufacturing
In Stock
$23.42
$15.38
You Save: 34%

mpn: 854-040, ean: 0054211165706,

4.5 out of 5 stars with 64 reviews
This Spears 854-040 schedule 80 glass-filled PVC Class 150 Van Stone flange fitting has a 4'' socket opening and is suitable for joining pipes or valves in a piping system or attaching a pipe to a flat surface or flange. The socket opening connects to pipes with a smooth bore for enhanced flow, and the bolt ring on the Van Stone flange rotates independently of the hub to aid in bolt alignment during installation. This flange fitting is made of glass-filled PVC (polyvinyl chloride) for chemical


Sea-Dog 3/4" Bronze Garboard Drain & T-Handle Plug
By Sea-Dog
In Stock
$16.39
$13.49
You Save: 18%
4.8 out of 5 stars with 59 reviews
Specifications: Die Cast Bronze Thread Size: 3/4'' NPT A: 2-5/16'' B: 13/16'' C: 1-1/8'' D: 3-1/2'' E: 1''.


Seachoice Prod: 1-1/4 in Twist Drain Plug, 18861 2PK
By SEACHOICE
In Stock
$14.57
$10.90
You Save: 25%

mpn: 581321, ean: 0705554432887,

4.3 out of 5 stars with 14 reviews
Brass twist plug with rugged construction for durability is fully adjustable and will not leak or jar loose. Mount from inside transom. 1-1/4''. No. 18861: Type: Twist, Flange Material: Brass, Outer Diameter: 1-1/4''Item Package Quantity-2. Seachoice Prod: 1-1/4 in Twist Drain Plug, 18861 2PK.



Viewing Page 2 of 4

View more products in Boat Plumbing.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - breezinthrucharters.com. All Rights Reserved.